Follow these steps to safely prepare your bioethanol fire pit kit for first use.

Before you start

  • Unpack all components and check against the parts list
  • Ensure you have all tools required (see manual)
  • Read the full installation guide before beginning

Step 1: Assemble the frame

Attach the side panels to the base frame using the provided fasteners. Ensure all connections are tight.

Step 2: Install the burner

Place the burner unit inside the frame. Align with the fuel inlet and electrical connections.

Step 3: Connect electrical leads

Connect the ignition and power leads to the control board. Check that connections are secure.

Step 4: Test the ignition

With no fuel present, test the ignition system. You should hear a clicking sound.

Step 5: Add fuel and ignite

Add approved bioethanol fuel to the burner. Press the ignition button to light.

Step 6: Safety check

Allow flames to settle and verify they are even across the burner surface.